HPGM-10BP

Cooling: 9,0 kW /
Heating: 10,0 kW
$first=true;
Short description of the series
The monobloc heat pump is a compact system with a single unit installed outdoors means the available space indoors remains unchanged, it is designed for installation in any type of property, especially homes with limited space. Based on Air to Water heat pump technology, it captures heat energy from the ambient air and transfers it to heat the water that is used to warm your home and supply domestic hot water, it can even cool your home as required. Compared to other technologies, up to 75% of the heat energy required is taken from the ambient air
Find out the price Where to buy
  • Description
  • Main advantages
  • Technical parameters

Description

Control System

The ATW monobloc Heat pump has 3 different kinds of control system to meet the specific requirement of customers.

Wired Controller

  • Mode control
  • Weekly timer function
  • Electric heater
  • Forced defrosting
  • Sterilization
  • Anti-freezing protection
  • WiFi function

 

Dry Contact

The heat pump reserves 3 dry contacts as standard and 4 dry contacts as customized, as well as 3 standard output contacts and 3 customized outputs which are 230V output terminals.

Modbus control

The PCB of heat pump outdoor unit has a built-in Modbus control port, so that it can be connected to the third party controllers or computer through Modbus protocol.

Build-in Hydraulic Module

The Monobloc is a fully packaged unit that the indoor and outdoor units are combined as one module. It does not require refrigerant piping work since the Monobloc’s outdoor unit is connected exclusively to water piping. Further, hydronic components such as plate heat exchanger, expansion tank and water pump are included in the package.

Multi Applications In One System

The system can realize heating in winter and cooling in summer, and can produce domestic hot water throughout the year. Various terminal equipment, floor heating, radiators and fan coils can be connected

High Energy Efficiency Performance

The use of advanced components and technologies such as high-pressure ratio DC inverter compressors, DC fan motors, PHE, EXV, etc., the monobloc heat pump system achieves high-efficiency performance in low ambient temperature environment.

R32 Eco Friendly Refrigerant

R32(HFC-32) is a highly environmentally friendly refrigerant, with 0 ODP and 675 GWP, low carbon footprint, no harm to the Ozone. And due to the lower GWP and refrigerant charge volume, R32 helps to protect the environment and preservie HFC quotas by reducing 77% of CO2 emission compared with R410a.

Multi Protections

There are various built-in protection measures to ensure the long-term stable and safe operation of the entire heat pump system.

  • Current protection
    System over-current protection
  • Voltage protection
    System over high voltage protection
    System over low voltage protection
  • Pressure protection
    High pressure protection
    Low pressure protection
  • Over-heat protection
    Discharged temperature
    Condenser coil temperature
    IPM over-heat protection
  • Anti-frozen protection
    Water temperature detect
    Refrigerant temperature detect

 

Night Silent Mode

By simple setting on the controller, the heat pump system can be timed to enter night silent mode that reduce noises by 3 dB(A).

Main advantages

DC inverter compressor
Pressure ratio up to 13, Good performance in low ambient environment.
DC motor
DC brushless fan motor, higher efficiency, lower noise.
Refrigerant cooling
Make sure the main PCB operates in proper temperature range to improve its reliability.
High efficiency BPHE
Excellent air path design, withstand high temperatures and high pressures.
EXV
Precise control and regulation of the refrigerant flow, 0-480 pulses
Inverter water pump
High efficiency inverter water pump, with high water pressure head up to 9m.

Technical parameters

Power supply 220~240V/1Ph/50Hz
Heating power 10,0
Cooling capacity 9,0
Max power consumption 4,8+3,0 kW
Max. current consumption 22+13,6 A
Seasonal energy efficiency, SCOP/SEER (A7W35/A35W18) 4,98/6,25 kW/kW
Energy efficiency class А+++
Coolant temperature (water)
Heating 25~62°С
Cooling 5~25°С
Hot water supply 25~60°С
Operating temperature mode -25~50°С
Water circulation
Exit DN25 mm
Inlet DN25 mm
Permissible excess operating pressure 0,3 MPa
Inverter water pump Yes
Resistance from the water side 25 kPa
Volume of the expansion tank 5 L
Evaporator (water volume) 1,08 L
Refrigerant
Type R32
Loading 1,8 kg
Throttle type EXV
Maximum allowable pressure 4,4 MPa
Reserve electric heater (tubular heater)
Power supply 220~240V/1Ph/50Hz
Performance 3kW
Number of phases 1 f
Max power consumption 3kW
Max. current consumption 13,6A
Noise level 66 dB(A)
Dimensions (H x W x D) 1335x475x875 mm
Packing (H x W x D) 1420x535x1045 mm
Net/gross weight 126,3/144,0 kg

Other series

Heat pumps
SPLIT

Select model

    Find out the price

    Warranty registration

    • Product registration
    • Warranty guide
    Product registration

    Thank you for choosing our shop and for your purchase! Here you can register the purchased climate control equipment to receive a 5-year warranty.

    Attention! You can find most of the information required for registration on the product packaging.

    • If you cannot fill out the registration form completely, then the official warranty is provided for two years subject to a correctly completed warranty card (attached to the sales receipt during the purchase).
    • You can get a warranty for 5 years, provided that the product is installed by an authorized technician with a personal certificate. You can verify validity of the certificate on the page.

    Important! Please note! A prerequisite for the warranty is an annual maintenance performed under a contract concluded by and between you and the technician. Each maintenance performed is recorded in the contract.

      Product registration to extend the warranty period to 5 years
      / /
      Download warranty card

      Warranty guide

      We guarantee quality and good performance of our equipment, and absence of defects, subject to observation of the rules of operation and regular maintenance. The warranty takes effect on the day of the product sale, as indicated on the sales receipt. During the warranty period, we deliver all necessary components to the buyer and carry out any repair work if the equipment failure is the manufacturer’s fault. This fact should be confirmed by the official service department.

      icon Download
      Warranty card

      Types of official guarantee

      2 years

      Official Manufacturer Warranty

      When you purchase a product from an authorized Sensei dealer, you can get a 2-year warranty. An important condition for setting the warranty period is the correct completion of the warranty card and issue of a sales receipt. A 2-year warranty applies to the products:

      • Household/semi-industrial/industrial air conditioners
      • Multisplit systems
      • Heat pumps

      5 years

      Extended Manufacturer Warranty

      A prerequisite for an extended warranty for a product purchased from an authorized Sensei dealer is the correct completion of the warranty card, conclusion of an agreement with an authorized installer, issue a sales receipt and registration on the website. You can get an extended warranty for a period of 5 years for all types of products:

      • Household/semi-industrial/industrial air conditioners
      • Multisplit systems
      • Heat pumps

        I accept the terms of the User agreement

          Assistance in the selection