OUTDOOR UNITS · Outdoor Units
SAC2M-U18SKWA/I
The SAC2M-U18SKWA/I is a high-tech, inverter-type multi-split outdoor unit with a capacity of 18,000 BTU (5.2 kW), designed to connect up to 2 indoor units simultaneously. We recommend this 2-port model for two-room apartments, spacious home offices, small commercial spaces, or private cottages where an independent microclimate is required in two separate zones (e.g., "bedroom + children's room" or "office + living room") while mounting only one compact unit on the building's facade.
MODELS
Year-Round Comfort
Engineered as a highly efficient air-to-air heat pump, this unit is certified for stable heating operation at outdoor temperatures down to -20°C...-22°C and cooling up to +43°C. Thanks to an intelligent refrigerant distribution system, the outdoor unit smoothly regulates capacity for each room individually, maintaining target parameters with an accuracy of up to 0.5°C and eliminating sudden startup loads on the local power grid.
Technical Advantages & Features
-
High Energy Efficiency Class (A++ / A+++): Full DC inverter control ensures outstanding seasonal efficiency, delivering a SEER of up to 6.1 (for cooling) and a SCOP of up to 4.0 (for heating).
-
Reliable Japanese Brand Compressor: The unit is equipped with a highly efficient GMCC (Toshiba) or Highly (Hitachi) compressor with enhanced rotor balancing, guaranteeing an extended operational lifespan.
-
Eco-Friendly R32 Refrigerant: The system is fully optimized for next-generation, ozone-safe R32 refrigerant, which increases overall capacity by 10% and significantly lowers energy consumption.
-
Winter Kit: Factory-installed intelligent crankcase and basepan heaters prevent condensate freezing and protect crucial mechanical components from damage during sub-zero startups.
Installation & Operation Insights
-
From our engineering teams' experience: The SAC2M-U18SKWA/I outdoor unit weighs approximately 34-38 kg and features a relatively compact footprint. It is mounted exclusively on reinforced metal brackets with specialized rubber vibration dampers to completely isolate micro-oscillations and ensure absolute quietness inside the home.
-
When designing the refrigerant lines, we carefully calculate the total pipe length and elevation drops to both rooms, utilizing high-quality, thick-walled copper piping to guarantee reliable operation under the high working pressure of R32 refrigerant.
Comparison with Other SENSEI Solutions
The SAC2M-U18SKWA/I model holds a massive advantage over installing two separate split systems, as it allows you to air-condition two rooms using only one outdoor unit.
Best Suited For:
-
Owners of 2-room apartments and small cottages who face strict developer restrictions regarding exterior wall aesthetics but want full independent climate control in two rooms.
-
Properties with strict power consumption limits, where the simultaneous startup of two conventional space heaters or ACs would trip the circuit breakers.
Might Not Be Suited For:
-
If you plan to air-condition more than two rooms, or if the total combined area exceeds 50-55 m², the capacity of this 5.2 kW unit will be insufficient; it is better to opt for a higher-capacity multi-split model.
PACKAGE CONTENTS
- Indoor unit
- Outdoor unit
- Remote control
- Installation manual
- Warranty card
Got an error? Check its meaning here.
Building facade aesthetics
A multi-split system with a single outdoor unit doesn't spoil the building's appearance. Instead of 5 units on the facade, there is just 1.
Individual control of each unit
Air parameters in one room are independent of another. The electronic refrigerant-distribution system precisely maintains the temperature in each room.
Uneven load principle
The combined capacity of the indoor units can exceed the output of the outdoor unit. Uneven thermal load increases system efficiency and minimizes the outdoor unit's size.
Wide choice of indoor units
Various types of climate equipment can be used for room air conditioning. SENSEI offers a range of models with different designs and feature sets
KEY SPECIFICATIONS
- Cooling (kW)
- 5.2
- Heating (kW)
- 5.2
- Power Supply
- 220~240/50/1
- Type
- R32
- Charge Volume (kg)
- 1,1
- Expansion Device
- EEV
- Compressor Manufacturer
- PANASONIC
PERFORMANCE
- Енергоефективність SEER/SCOP
- 6,1/4,0
- Current Draw (A)
- 6,21
- Power Consumption (kW)
- 1,4
SOUND AND CONVENIENCE
- Outdoor Unit Noise Level (dB)
- 54
INSTALLATION AND PIPING
- Pipe Diameter (mm)
- Ø6.35*2/Ø9.52*2 (1/4"*2 : 3/8"*2)
- Maximum Height Difference (m)
- 5
- Maximum Line Length (m)
- 20
- Operating Temperatures (Heating)
- -20~+30
- Operating Temperatures (Cooling)
- -15~+55
INDOOR UNIT DIMENSIONS AND WEIGHT
- Indoor Unit Dimensions (W×D×H)
- 960x700x396
OUTDOOR UNIT DIMENSIONS AND WEIGHT
- Packaged Dimensions (W×H×D, mm)
- 1014x763x455
- Weight / Packaged (kg)
- 45/48.5
OTHER SERIES
View All