SAC-12SKWA/I
SAC-12SKWA/I

ALASKA PRO · SENSEI PRO

SAC-12SKWA/I

Cooling: 3.5 kW
Heating: 3.65 kW
Area: up to 35 m2

The SAC-12SKWA/I is a full-fledged, low-temperature air-to-air heat pump designed for spaces ranging from 25 to 35 m². We recommend this "12k BTU" model as a standalone solution for properties where the system is intended to be the primary, sole, or high-efficiency heating source throughout the entire winter. It is the ideal choice for energy-efficient country houses, modern apartments without centralized heating, standalone offices, or commercial spaces where electricity expenses must be radically reduced compared to conventional convection heaters.

Wi-Fi module

MODELS

Official warranty
Delivery across Ukraine

Year-Round Comfort

This air conditioner is engineered for extreme climates and certified for heating operation at outdoor temperatures down to -30°C. Unlike standard inverters, the ALASKA PRO series maintains high heating capacity even during severe winter frosts. In summer, the system operates in an ultra-smooth mode, steadily managing heat loads and maintaining optimal cooling without temperature fluctuations.

Technical Advantages & Features

  • Two-Stage Compressor with Vapor Injection: Ensures stable refrigerant pressure and high heating capacity at record-low outdoor temperatures.

  • Crankcase and Basepan Heaters: The factory-installed winter kit prevents condensate freezing and guarantees a safe, smooth equipment startup at -30°C.

  • Class A+++ Energy Efficiency: The highest seasonal efficiency rating (SCOP) allows the system to deliver up to 4.5 kW of heat for every kilowatt of electricity consumed.

Installation & Operation Insights

  • From experience: The ALASKA PRO series features a solid, high-quality build. The indoor unit casing remains completely silent during defrost cycles and temperature shifts.

  • During the installation of the SAC-12SKA/I model, our team pays close attention to winter condensate drainage from the outdoor unit. Since a significant volume of water is generated in heat pump mode, we recommend mounting the unit on an elevated ground stand and installing a drainage heating cable to prevent ice buildup under the property.

  • Unlike the AIR MASTER PRO series, which primarily focuses on air purification, the ALASKA PRO is a heavy-duty climate station built to withstand continuous, critical loads during harsh winters.

Best Suited For:

  • Owners of private houses, cottages, and apartments (up to 35 m²) looking for an energy-efficient alternative to gas or conventional electric heating.

  • Commercial facilities without centralized utilities where maximizing heating efficiency during winter is critical.

PACKAGE CONTENTS

  • Indoor unit
  • Outdoor unit
  • Remote control
  • Installation manual
  • Warranty card
PACKAGE CONTENTS
Error codes Indoor unit manual Outdoor unit manual

Got an error? Check its meaning here.

Wi-Fi module

This function lets you control the system over the Internet. You can adjust the temperature and other settings remotely.

Energy efficiency

Elegant Inverter wall-mounted split systems are rated energy class A (cooling A++ / heating A+++). The units are economical. Inverter technology has refined air conditioner operation and reduced energy consumption. In heating mode the system consumes just 0.745 kW.

Filtration

The Golden Fin antibacterial coating destroys pathogenic microorganisms and has sterilizing properties.

Heating mode

Thanks to the compressor and DC motors, the system delivers excellent performance in Heating mode during winter. The intelligent defrosting program and Intelligent Preheating frost protection allow the air conditioner to operate at outdoor temperatures down to -25°C.

DC Inverter

The high-performance DC Inverter maximizes the service life of your climate equipment and improves energy efficiency. This technology reduces noise and vibration, shortens the time needed to reach set parameters, and minimizes load on the power grid.

Plasma purification technology

The generator produces active hydrogen and oxygen ions that bind to viruses, bacteria, and dust. These substances are removed from the room along with the condensate. This technology improves air quality. Cold plasma cleans the airflow of harmful substances and saturates it with active ions.

3-D airflow distribution

Automatic swing of the indoor unit louvers creates a natural breeze effect. The flaps direct airflow in different directions, maintaining an even temperature throughout the room.

Noise level

The improved indoor unit design reduces noise levels to just 20 dB. The air conditioner's operation is unnoticeable — yet the results are not.

Auto defrost

To prevent the outdoor unit from icing over and ultimately failing, the auto-defrost system switches on automatically (for 5-10 minutes the air conditioner runs in cooling mode without the indoor unit fan, warming the outdoor unit's heat exchanger and thawing it).

KEY SPECIFICATIONS

Cooling (kW)
3.5
Heating (kW)
3.65
Recommended Area (m²)
35
Refrigerant Type
R32
Design
Split system
Compressor Type
inverter, rotary Panasonic
Main Modes
Main modes heating, cooling, ventilation, automatic, dehumidification
Remote Control
Remote control
Power Supply
220-240 V ~ / 50 Hz to the outdoor unit
Indoor Unit Color
white
Additional Functions
24-hour timer Self-diagnostics TURBO mode Auto restart 3-speed and automatic outdoor unit fan control (DC motor) Vertical Auto Swing Super Quiet mode (19 dB) Maintenance heating 8 ° C 5-step and automatic indoor unit fan speed control (DC motor) Built-in WIFI module "Plasma generator ion" system Intelligent air conditioner frost protection (Intelligent Preheating) Intelligent Defrosting ECO mode HEALTH mode Start at low system voltage Filter clogging notification Winter kit
LCD Display
+
Wi-Fi
+

PERFORMANCE

Power Consumption Cooling/Heating (kW)
1.01/0,97
Air Flow (m³/h)
580
EER Energy Efficiency
6.5/3.47
COP Energy Efficiency
4,0/3,76

SOUND AND CONVENIENCE

Indoor Unit Noise Level (dB)
40/35/22/20
Outdoor Unit Noise Level (dB)
50

INSTALLATION AND PIPING

Pipe Diameter (mm)
Ø6.35/Ø9.53 (1/4" 3/8")
Maximum Height Difference (m)
10
Maximum Line Length (m)
20
Operating Temperatures (card)
-25 ~ +24 /-15 ~ +53

INDOOR UNIT DIMENSIONS AND WEIGHT

Height (cm)
28.3
Width (cm)
82.1
Depth (cm)
20
Indoor Unit Weight (kg)
9,5
Indoor Unit Dimensions (W×D×H)
89.8×35.3×29.1 cm

OUTDOOR UNIT DIMENSIONS AND WEIGHT

Outdoor Unit Weight (kg)
27,5
Outdoor Unit Dimensions (W×D×H)
87.9×36.6×60.5 cm
Outdoor Unit Mounting Bolt Spacing
540 mm

OTHER SERIES

View All