SAC-09SKWA/I
SAC-09SKWA/I

ALASKA PRO · SENSEI PRO

SAC-09SKWA/I

Cooling: 2.6 kW
Heating: 2.8 kW
Area: up to 25 m2

The SAC-09SKWA/I is an uncompromising workhorse in the premium heat pump segment. We recommend it for rooms up to 25 m² with high equipment durability requirements. It is built for seamless, heavy-duty 24/7 operation in both cooling and heating modes at temperatures down to -30°C.

Wi-Fi module

MODELS

Official warranty
Delivery across Ukraine

Reliable Heating Even in Severe Frosts

The ALASKA PRO series comes equipped with heavy-duty outdoor unit basepan and crankcase heaters, alongside an intelligent heat exchanger defrost system guided by pressure and temperature sensors. This prevents fan icing during severe winter conditions.

  • Key Fact: We supply the higher-capacity models of this specific series (18k and 24k BTU) to infrastructure facilities, logistics hubs, and regional corporate offices. Where equipment operates under continuous load and failure is not an option, the Alaska Pro demonstrates a near-zero defect rate.

Inverter Compressor and R32 Refrigerant

The system features a highly reliable, industrial-grade compressor optimized for R32 refrigerant:

  • Maximum protection against power grid voltage fluctuations.

  • Stable heating performance even during critical outdoor temperature drops.

  • Class A+++ seasonal energy efficiency rating.

Installation Insights

Due to its heavy-duty compressor, the outdoor unit has a substantial weight. When installing on insulated building facades, we use specialized elongated threaded rods and reinforced brackets to prevent any deformation of the thermal insulation.

Best Suited For:

  • Facilities with high fault-tolerance requirements (offices, server rooms, year-round country houses).

  • The B2B segment and commercial spaces requiring continuous winter heating.

  • Users looking for durable climate control equipment with maximum compressor lifespan.

PACKAGE CONTENTS

  • Indoor unit
  • Outdoor unit
  • Remote control
  • Installation manual
  • Warranty card
PACKAGE CONTENTS
Error codes Outdoor unit manual Indoor unit manual

Got an error? Check its meaning here.

Wi-Fi module

This function lets you control the system over the Internet. You can adjust the temperature and other settings remotely.

Energy efficiency

Elegant Inverter wall-mounted split systems are rated energy class A (cooling A++ / heating A+++). The units are economical. Inverter technology has refined air conditioner operation and reduced energy consumption. In heating mode the system consumes just 0.745 kW.

Filtration

The Golden Fin antibacterial coating destroys pathogenic microorganisms and has sterilizing properties.

Heating mode

Thanks to the compressor and DC motors, the system delivers excellent performance in Heating mode during winter. The intelligent defrosting program and Intelligent Preheating frost protection allow the air conditioner to operate at outdoor temperatures down to -25°C.

DC Inverter

The high-performance DC Inverter maximizes the service life of your climate equipment and improves energy efficiency. This technology reduces noise and vibration, shortens the time needed to reach set parameters, and minimizes load on the power grid.

Plasma purification technology

The generator produces active hydrogen and oxygen ions that bind to viruses, bacteria, and dust. These substances are removed from the room along with the condensate. This technology improves air quality. Cold plasma cleans the airflow of harmful substances and saturates it with active ions.

3-D airflow distribution

Automatic swing of the indoor unit louvers creates a natural breeze effect. The flaps direct airflow in different directions, maintaining an even temperature throughout the room.

Noise level

The improved indoor unit design reduces noise levels to just 20 dB. The air conditioner's operation is unnoticeable — yet the results are not.

Auto defrost

To prevent the outdoor unit from icing over and ultimately failing, the auto-defrost system switches on automatically (for 5-10 minutes the air conditioner runs in cooling mode without the indoor unit fan, warming the outdoor unit's heat exchanger and thawing it).

KEY SPECIFICATIONS

Cooling (kW)
2.6
Heating (kW)
2.8
Recommended Area (m²)
25
Refrigerant Type
R32
Design
split system
Indoor Unit
wall-mounted
Compressor Type
inverter, rotary Panasonic
Main Modes
heating, cooling, recirculation, dehumidification
Remote Control
Remote control
Power Supply
220-240 V ~/50 Hz to the outdoor unit
Indoor Unit Color
white
Additional Functions
24-hour timer Self-diagnostics TURBO mode Auto restart 3-speed and automatic outdoor unit fan control (DC motor) Vertical Auto Swing Super Quiet mode (19 dB) Maintenance heating 8 ° C 5-step and automatic indoor unit fan speed control (DC motor) Built-in WIFI module "Plasma generator ion" system Intelligent air conditioner frost protection (Intelligent Preheating) Intelligent Defrosting ECO mode HEALTH mode Start at low system voltage Filter clogging notification Winter kit
LCD Display
+
Wi-Fi
+

PERFORMANCE

Power Consumption Cooling/Heating (kW)
0,75/0,75
Air Flow (m³/h)
520
EER Energy Efficiency
6.7/3.47
COP Energy Efficiency
4,0/3,76

SOUND AND CONVENIENCE

Indoor Unit Noise Level (dB)
38/34/21/19
Outdoor Unit Noise Level (dB)
52

INSTALLATION AND PIPING

Pipe Diameter (mm)
Ø6.35/Ø9.53 (1/4" 3/8")
Maximum Height Difference (m)
10
Maximum Line Length (m)
20
Operating Temperatures (card)
-25 ~ +24 /-15 ~ +53

INDOOR UNIT DIMENSIONS AND WEIGHT

Height (cm)
28.3
Width (cm)
82.1
Depth (cm)
20
Indoor Unit Weight (kg)
9,5
Indoor Unit Dimensions (W×D×H)
89.8×35.3×29.1 cm

OUTDOOR UNIT DIMENSIONS AND WEIGHT

Outdoor Unit Weight (kg)
27,0
Outdoor Unit Dimensions (W×D×H)
87.9×36.6×60.5 cm
Outdoor Unit Mounting Bolt Spacing
540 mm

OTHER SERIES

View All